My Account
Epoxy Resin System for Carbon Fiber - Fiberglass - Kevlar - 12 oz.
Item No : EPXY-RES-CRBNKEV-12

2:1 Two Part Epoxy Resin System 12 oz.

C&J Composites Technology has a base resin system that was originally developed for lightweight hand lay-up composite systems. Its unique four way flex controlled resin ensemble provides more latitude in developing production systems than any other resin system available today.

The balance of excellent color, UV stability, varying hardener speeds, easy mix ratios, extremely low vapor pressure, excellent chemical adhesion and high gloss finish make this resin system easy to use and an effective production contributor to everyone from the small craftsman to large scale producers.

The resin system package contains an optical brightener and a UV stabilizer.  The optical brightener gives the resin a slight blue color and makes products appear whiter.  The UV absorber is a shield which blocks damaging UV rays.  The UV sensitive resin system will significantly protect and enhance the finished high gloss surface. The resin dries clear.

 

Resin/Hardener Typical Physical Properties

Typical Application

All purpose system. Best for use with most fiberglass and carbon fiber hand lay-up systems. Also used in, marine, adhesives, coatings, vacuum bagging, casting, and electronic encapsulation.

Viscosity cps @ 25C 

1600

Mix by Volume

2 to 1

Mix by Weight

100 to 45

Tensile Strength

9,800

Tensile Modulus

405,000

Flexural Strength

14,800

Flexural Modulus

480,000

HDT

122F

Compression. Yield

15,400

Elongation %

3.8

 

Hardener

Mix Ratio

Pot Life

Set Time

Typical Cure
Schedule

 

Weight

Volume

@25C

 

 

CJ Epoxy Hardener

45 

50 

25 min. 

2.5 hrs 

room temp 

 

Each item contains 8 ounces of epoxy resin and 4 ounces of hardener, which consists of a total of 12 ounces. (mix at 2 parts epoxy resin to 1 part of the hardener) 12 oz. Kit.

 


 

Epoxy Resin System for Carbon Fiber - Fiberglass - Kevlar - 12 oz.

Our Price: $42.00


[-] Close